Centurion Garage Door Motors
Centurion XTrac │ Centurion RDO
Centurion Garage Door Motor New Installations
We supply and install all Centurion garage door motors. Our technicians are fully trained on the Centurion garage door products so you can be assured of a perfect installation.
Centurion Garage Door Motor Service
Get one of our technicians out to service your Centurion garage door motor. This will ensure that your garage motor keeps on operating smoothly.
Centurion Garage Door Motor Repairs
We can most likely repair your Centurion garage door motor. Our technicians will be happy to come to your premises and assess the fault on the garage door motor.
Centurion XTRAC
DOMESTIC SECTIONAL AND TIP-UP GARAGE DOOR MOTOR
- Does using your garage door sound like a castle lowering its drawbridge?
- Unlike the garage door motors of yesteryear, the XTRAC’s super quiet and powerful 24V DC motor is connected directly to the garage door and travels with it as it opens or closes.
- No more clanking chains result in a smoother and quieter ride.
- No power? No problem. The XTrac isn’t fazed by any power issues – be they low voltages, spikes or even failures.
- The XTrac can be set up in a matter of minutes, powers both sectional and tip-up doors and come with a host of vital functions and features. Quiet, safe and reliable.
MAIN FEATURES
- Revolutionary design providing whisper-quiet operation.
- Battery backup (with dual power–always on).
- Strong and reliable 24V geared DC motor.
- Adaptive anti-crushing protection.
- Adjustable speed control – suitable for both sectional and tip-up doors.
- Manual override can disengage and re-engage in any position.
- Onboard CENTURION code-hopping multichannel receiver:
– Open/close garage door.
– Switch Courtesy Light on and off.
– Override automatic closing.
– Electronically lock the system for added security. - Quick and easy installation and adjustment.
- Door Service Monitor.
- Wireless Wall Switch for convenient operation of up to four onboard functions.
TECHNICAL DATA
- Input Voltage – 180 – 270V AC @ 50/60Hz
- Motor Voltage – 24V DC
- Motor Power Supply – Dual supply – 250VA max. Mains power supply, with 2 X 1.5AH 24V battery backup supply.
- Opener Lifting Force – Max 1200N
- Operator Travel Speed – 90 – 125mm/sec (adjustable)
- Duty Cycle – Mains Present
- Daily Operations – Max 50
- Maximum Door Size – 12m² – (max width 6.5m)
- Onboard Receiver Specification CENTURION code-hopping, single channel, 433MHz, with 22 transmitter buttons capacity.
- Can operate off a solar supply, consult Centurion Systems for assistance. 2 x 1.5Ah batteries (can be upgraded for extended power failure autonomy). Based on a 25°c ambient temperature. Based on a pull force of less than 50% of rated.
MANUFACTURER WARRANTY
New Product Warranties
- All CENTURION products are manufactured with extreme care, thoroughly inspected and tested.
- The goods supplied by CENTURION shall be subject to the provisions of sections 55 to 57 of the Consumer Protection Act (68/2008) except where the provisions of the warranty contained in the CENTURION product documentation are more favorable to the purchaser.
- Subject to the warranty contained in the CENTURION product documentation, if applicable, CENTURION products are warranted for twenty-four months after delivery.
- However, it is expressly noted that batteries carry a six-month warranty due to the nature of these products being such that they are subject to possible misuse.
- Please note that warranties will be honored on a carry-in basis; in other words, the product in question must be taken into one of Centurion’s branches, or to the authorized Centurion reseller that the product was purchased from, for assessment and, if necessary, repair.
- For equipment not of Centurion’s manufacture the warranty as supplied by the original manufacturer will apply if such warranty is more favourable to the purchaser than the relevant provisions of the Consumer Protection Act (68/2008).
- Such warranty is valid only once full payment has been received for such goods.
- Any warranty may be voidable on any equipment which:
- i) Has not been installed in accordance with the installation instructions provided.
- ii) Has been subject to misuse or which has been used for any purpose other than that designed for by the manufacturers.
- iii) Has damage caused as a result of handling during transit, atmospheric conditions (including lightning), corrosion of metal parts, insect infestation, power surges or other forces outside of the control of CENTURION.
- iv) Has been repaired by any workshop or person not previously authorized by CENTURION.
- v) Has been fixed with components not already tested, passed or approved by CENTURION. We will not be liable under this contract for any loss or damage caused by us or our employees or agents in circumstances where:
- i) There has been a failure to install the product in accordance with the installation instructions provided by Centurion, or
- ii) a failure to abide by the safety instructions provided by Centurion, or
- iii) there is no breach of a legal duty of care owed to you by us or by any of our employees or agents
- iv) such loss or damage is not a reasonably foreseeable result of any such breach and any increase in loss or damage resulting from breach by you of any term of this contract.
Repairs and Servicing – Terms and Conditions
- All Centurion products that are brought in for repair are serviced with extreme care, thoroughly inspected and tested.
- All repairs are subject to the relevant provisions of the Consumer Protection Act (68/2008) and are warranted against faulty materials and workmanship for three months from the repairs’ invoice date.
- Repairs to goods within the normal two years warranty period are warranted for the unexpired portion of the original product warranty, otherwise, a three-month warranty from the date of repairs, whichever period is greater and more beneficial to the customer will apply.
- All other conditions of our warranty on the purchase of a new item, as per our standard terms and conditions of sale, will apply, i.e., a repair will not influence the original warranty.
- Products with mechanical faults will be repaired or serviced at Centurion Systems’ technical centre, or a pre-authorised technical centre appointed by Centurion Systems.
- All repairs or services on mechanical operators will be quoted and then authorized by the client before commencing with the repair.
- Electronic circuit boards or devices will typically be exchanged with service exchange items.
- These items will be charged at an exchange price when the faulty items are returned and must be in a repairable condition.
- Products found to be damaged beyond economical repair will need to be replaced with new items once the client has approved the quote.
- A ‘strip-down’ charge of R75.00 excluding VAT* will be levied if the quotation is not accepted.
- Any circuit board or operator that was only tested, and not repaired, will NOT result in the guarantee period being extended, where applicable.
- Warranties on any repair will not apply to any product which:
- a) has been subject to misuse, or which has been used for any purpose other than it was designed for by Centurion Systems;
- b) has not been installed per the installation instructions provided;
- c) has been damaged as a result of handling during transit, atmospheric conditions, insect infestation, power surges, an act of god or other forces outside of Centurion Systems’ control;
- d) has been repaired by any person or workshop NOT authorized by Centurion Systems;
- e) has been repaired with components that have not been tested, passed or authorized by Centurion Systems.
- It is the responsibility of the customer to ensure that ALL items handed over to Centurion Systems for repair, are correctly specified on the Service Notification or Goods Receipt Voucher, whichever is applicable.
- Items not collected within three months will be sold to defray costs.
- This applies to all items that have been repaired and are ready for collection, items awaiting quote approval and items where the quote has been rejected.
- To confirm ownership, clients must present the original Service Notification or Goods Receipt Voucher when collecting their repairs.
- A strip-down charge is referred to for RSA markets only.
Centurion RDO
DOMESTIC ROLL-UP GARAGE DOOR MOTOR
- This is the way we roll! With our RDO II roll-up garage door motor that is.
- A 24V DC high-torque motor, operating so quietly you’ll need to look at the door just to be sure that it’s moving.
- With an RDO II, not even power outages can close you down.
- Its reliable battery backup will keep you coming and going like there’s no tomorrow.
- All this opening and closing had better be safe and secure. Utilising Centurion’s ultra-secure code-hopping remote controls, and coupled with its anti-crushing sensitivity, the RDO II has you covered.
MAIN FEATURES
- Battery backup.
- Strong lifting capability.
- Whisper-quiet operation.
- Anti-crushing protection.
- Quick and easy installation.
- Wall mounted controller with Courtesy Light.
- Onboard multichannel code-hopping receiver:
– Open/close garage door.
– Switch Courtesy Light on and off.
– Override automatic closing.
– Electronically lock the system for added security. - Compatible with CENTURION infrared safety beams.
TECHNICAL DATA
- Input Voltage – 220 – 240V +/- 10%, 50Hz
- Motor Voltage – 24V DC
- Motor Power Supply – Battery-driven [**] – 200mA Charger – Peak
- Opener Lifting Force – 30kgf
- Door Travel Speed – 100 – 150mm/sec
- Duty Cycle – Mains Present – 20%
- Daily Operations – Max – 20
- Maximum Door Size – 6m² – (max width 2.8m)
- Onboard Receiver Specification – CENTURION code-hopping, 433MHz, capacity – 36 transmitter buttons
- Can operate off a solar supply, consult Centurion Systems for assistance. 2 x 1.2A/H batteries (can be upgraded for longer power failure autonomy) – Based on a pull force of less than 50% of rated – Based on 25°c ambient temperature – Only one button per transmitter used.
MANUFACTURER WARRANTY
New Product Warranties
- All CENTURION products are manufactured with extreme care, thoroughly inspected and tested.
- The goods supplied by CENTURION shall be subject to the provisions of sections 55 to 57 of the Consumer Protection Act (68/2008) except where the provisions of the warranty contained in the CENTURION product documentation are more favorable to the purchaser.
- Subject to the warranty contained in the CENTURION product documentation, if applicable, CENTURION products are warranted for twenty-four months after delivery.
- However, it is expressly noted that batteries carry a six-month warranty due to the nature of these products being such that they are subject to possible misuse.
- Please note that warranties will be honored on a carry-in basis; in other words, the product in question must be taken into one of Centurion’s branches, or to the authorized Centurion reseller that the product was purchased from, for assessment and, if necessary, repair.
- For equipment not of Centurion’s manufacture the warranty as supplied by the original manufacturer will apply if such warranty is more favourable to the purchaser than the relevant provisions of the Consumer Protection Act (68/2008).
- Such warranty is valid only once full payment has been received for such goods.
- Any warranty may be voidable on any equipment which:
- i) Has not been installed in accordance with the installation instructions provided.
- ii) Has been subject to misuse or which has been used for any purpose other than that designed for by the manufacturers.
- iii) Has damage caused as a result of handling during transit, atmospheric conditions (including lightning), corrosion of metal parts, insect infestation, power surges or other forces outside of the control of CENTURION.
- iv) Has been repaired by any workshop or person not previously authorized by CENTURION.
- v) Has been fixed with components not already tested, passed or approved by CENTURION. We will not be liable under this contract for any loss or damage caused by us or our employees or agents in circumstances where:
- i) There has been a failure to install the product in accordance with the installation instructions provided by Centurion, or
- ii) a failure to abide by the safety instructions provided by Centurion, or
- iii) there is no breach of a legal duty of care owed to you by us or by any of our employees or agents
- iv) such loss or damage is not a reasonably foreseeable result of any such breach and any increase in loss or damage resulting from breach by you of any term of this contract.
Repairs and Servicing – Terms and Conditions
- All Centurion products that are brought in for repair are serviced with extreme care, thoroughly inspected and tested.
- All repairs are subject to the relevant provisions of the Consumer Protection Act (68/2008) and are warranted against faulty materials and workmanship for three months from the repairs’ invoice date.
- Repairs to goods within the normal two years warranty period are warranted for the unexpired portion of the original product warranty, otherwise, a three-month warranty from the date of repairs, whichever period is greater and more beneficial to the customer will apply.
- All other conditions of our warranty on the purchase of a new item, as per our standard terms and conditions of sale, will apply, i.e., a repair will not influence the original warranty.
- Products with mechanical faults will be repaired or serviced at Centurion Systems’ technical centre, or a pre-authorised technical centre appointed by Centurion Systems.
- All repairs or services on mechanical operators will be quoted and then authorized by the client before commencing with the repair.
- Electronic circuit boards or devices will typically be exchanged with service exchange items.
- These items will be charged at an exchange price when the faulty items are returned and must be in a repairable condition.
- Products found to be damaged beyond economical repair will need to be replaced with new items once the client has approved the quote.
- A ‘strip-down’ charge of R75.00 excluding VAT* will be levied if the quotation is not accepted.
- Any circuit board or operator that was only tested, and not repaired, will NOT result in the guarantee period being extended, where applicable.
- Warranties on any repair will not apply to any product which:
- a) has been subject to misuse, or which has been used for any purpose other than it was designed for by Centurion Systems;
- b) has not been installed per the installation instructions provided;
- c) has been damaged as a result of handling during transit, atmospheric conditions, insect infestation, power surges, an act of god or other forces outside of Centurion Systems’ control;
- d) has been repaired by any person or workshop NOT authorized by Centurion Systems;
- e) has been repaired with components that have not been tested, passed or authorized by Centurion Systems.
- It is the responsibility of the customer to ensure that ALL items handed over to Centurion Systems for repair, are correctly specified on the Service Notification or Goods Receipt Voucher, whichever is applicable.
- Items not collected within three months will be sold to defray costs.
- This applies to all items that have been repaired and are ready for collection, items awaiting quote approval and items where the quote has been rejected.
- To confirm ownership, clients must present the original Service Notification or Goods Receipt Voucher when collecting their repairs.
- A strip-down charge is referred to for RSA markets only.
Centurion SDO4
DOMESTIC SECTIONAL AND TIP-UP GARAGE DOOR MOTOR
- We know that arriving home is more than just some automatic action or daily ritual. It’s an experience that’s charged with emotion
– the feeling of seeing your loved ones, your pets, the big-screen TV and all the other comforts that you miss during the day.
With the SDO4, that experience begins the moment that you open your garage door.
With whisper-quiet operation and movement that’s smoother than a Barry White song, the SDO4 garage door operator for tip-up
and sectional doors lets you know you’re home.
MAIN FEATURES
- An SDO4 to suit your door
The SDO4 comes in two different models, making it suitable for virtually any size domestic
garage door. Choose the T10 for smaller doors up to 12 square metres, or automate your
bigger door with the powerful T12 model. - Battery-driven – ALWAYS on
You need to be somewhere in a hurry. The power goes out. You’re going nowhere.
Unless you have the SDO4, that is. The SDO4 switches seamlessly between mains and battery
power in the event of a power outage, so it’s always on. You can even use solar power to
charge the system1. - Reliable DC motor
Our 24V geared DC motor provides enough power to move even the largest door quietly and
reliably. - Adaptive anti-crushing control
The SDO4 was designed with safety in mind! The built-in anti-crushing circuitry will cause the
door to stop and reverse if an obstruction is detected, helping to prevent serious damage or
injury2. - Ease of installation, adjustment and setup
Ready. Set. Go! The drive unit slides into the rail and the control box slots into position at the
back, it’s as simple as that. Additionally, the built-in LED display and colour-coded buttons
together make it a delight to confi gure settings and toggling between the operator’s many
unique features couldn’t be easier. - Total security at the press of a button
The hand that rocks the cradle is the hand that rules the world… and so is the hand that
controls Holiday Lockout Mode! This onboard high-security feature allows you to electronically
lock your garage door by pressing one of the Wireless Wall Switch or remote control buttons,
giving you total control of who gets in. - Lock in any position
For increased security, the Manual Override can be disengaged and then re-engaged in any
position. If you’re going away on holiday you can also electronically lock your SDO4 so that
not even a learned-in remote control can operate the door. - Autoclose3
Look, Ma, no hands! If you forget to close your garage door, your SDO4 will do it for you – if
you’ve activated the Autoclose feature. Or maybe you’re moving stuff out of your garage and
need the door to remain open – overriding Autoclose is as easy as pressing a button!
3. Infrared safety beams need to be installed to utilise the Autoclose feature. - Onboard receiver with code-hopping security
A home security system that fi ts in your pocket. Our four-button code-hopping remote control
utilises the same technology found in top of the range vehicle security systems and can control
your SDO4, home alarm system, automatic gate motors and whatever else you need to feel
safe. Rest easy, knowing there’s a CENTURION standing guard. - Effortlessly switch between door types for the ultimate in
fl exibility
The SDO4 is suitable for both sectional and tip-up doors, and toggling between the two using
the intuitive LED display automatically, and intelligently, adapts the run profile to suit the
selected door type. - Door Service Monitor
Using adaptive load sensing technology, our Door Service Monitor keeps an eye on things and
a courtesy lamp will fl ash and a buzzer will sound when your door springs are worn out and
need maintenance. - Courtesy Light Control
The SDO4’s onboard light is always at your beck and call. Have it work as a Courtesy Light,
bathing your garage in a welcoming glow when the operator is activated, or switch it on and off
as needed, using one of the Wireless Wall Switch or remote control buttons.
Need to get a wrench from your garage to fi x a leaky faucet in the middle of the night? Let the
SDO4 light the way! - Convenient template learning
In a hurry? Thanks to the SDO4’s intelligent template learning feature, you can learn all the
buttons on your four-button remote control or Wireless Wall Switch in a set confi guration in a
matter of seconds! - Energy-saving technology
Save the planet! Not only will the SDO4 continue to operate during periods of unstable power
or even power outages, but it is incredibly easy on resources. In Sleep Mode it reaches a record
low power consumption of 0.5W. If this energy-saving technology isn’t enough, hook the
SDO4 up to a solar panel and politely inform the neighbours that you have a ‘zero emissions
operator’.
TECHNICAL DATA
| T10 | T12 | |
| Input voltage | 220-230V AC @ 50/60Hz1 | 220-230V AC @ 50/60Hz |
| Motor voltage1 | 24V DC | 24V DC |
| Motor power supply2 – rated | 80W DC | 100W DC |
| Motor supply | Battery supply 2 x 3.4Ah 24V DC | Battery supply 2 x 3.4Ah 24V DC |
| Maximum door width | 6.5 metres | 6.5 metres |
| Maximum door area | 12 metres² | 15 metres² |
| Maximum lifting capacity | 1000N | 1200N |
| Operattions in standby mode | 12 to 30, dependent on door size, weight, height and duration of power failure | 12 to 30, dependent on door size, weight, height and duration of power failure |
| Opener travel speed | Tip-up 80mm/sec. Sectional 140mm/sec with fully-charged batteries | Tip-up 80mm/sec. Sectional 140mm/sec with fully-charged batteries |
| Door travel adjustment | Physical end-stops | Physical end-stops |
| Safety obstruction force system | Built-in menu | Built-in menu |
| Ligh | LED 2W | LED 2W |
| Autoclose2 | Internal menu option | Internal menu option |
| Infrared safety beams | Internal menu option | Internal menu option |
| Onboard receiver type | Code-hopping single channe | Code-hopping single channel |
| Receiver code storage capacity | 20 transmitters | 20 transmitter |
MANUFACTURER WARRANTY
New Product Warranties
- All CENTURION products are manufactured with extreme care, thoroughly inspected and tested.
- The goods supplied by CENTURION shall be subject to the provisions of sections 55 to 57 of the Consumer Protection Act (68/2008) except where the provisions of the warranty contained in the CENTURION product documentation are more favorable to the purchaser.
- Subject to the warranty contained in the CENTURION product documentation, if applicable, CENTURION products are warranted for twenty-four months after delivery.
- However, it is expressly noted that batteries carry a six-month warranty due to the nature of these products being such that they are subject to possible misuse.
- Please note that warranties will be honored on a carry-in basis; in other words, the product in question must be taken into one of Centurion’s branches, or to the authorized Centurion reseller that the product was purchased from, for assessment and, if necessary, repair.
- For equipment not of Centurion’s manufacture the warranty as supplied by the original manufacturer will apply if such warranty is more favourable to the purchaser than the relevant provisions of the Consumer Protection Act (68/2008).
- Such warranty is valid only once full payment has been received for such goods.
- Any warranty may be voidable on any equipment which:
- i) Has not been installed in accordance with the installation instructions provided.
- ii) Has been subject to misuse or which has been used for any purpose other than that designed for by the manufacturers.
- iii) Has damage caused as a result of handling during transit, atmospheric conditions (including lightning), corrosion of metal parts, insect infestation, power surges or other forces outside of the control of CENTURION.
- iv) Has been repaired by any workshop or person not previously authorized by CENTURION.
- v) Has been fixed with components not already tested, passed or approved by CENTURION. We will not be liable under this contract for any loss or damage caused by us or our employees or agents in circumstances where:
- i) There has been a failure to install the product in accordance with the installation instructions provided by Centurion, or
- ii) a failure to abide by the safety instructions provided by Centurion, or
- iii) there is no breach of a legal duty of care owed to you by us or by any of our employees or agents
- iv) such loss or damage is not a reasonably foreseeable result of any such breach and any increase in loss or damage resulting from breach by you of any term of this contract.
Repairs and Servicing – Terms and Conditions
- All Centurion products that are brought in for repair are serviced with extreme care, thoroughly inspected and tested.
- All repairs are subject to the relevant provisions of the Consumer Protection Act (68/2008) and are warranted against faulty materials and workmanship for three months from the repairs’ invoice date.
- Repairs to goods within the normal two years warranty period are warranted for the unexpired portion of the original product warranty, otherwise, a three-month warranty from the date of repairs, whichever period is greater and more beneficial to the customer will apply.
- All other conditions of our warranty on the purchase of a new item, as per our standard terms and conditions of sale, will apply, i.e., a repair will not influence the original warranty.
- Products with mechanical faults will be repaired or serviced at Centurion Systems’ technical centre, or a pre-authorised technical centre appointed by Centurion Systems.
- All repairs or services on mechanical operators will be quoted and then authorized by the client before commencing with the repair.
- Electronic circuit boards or devices will typically be exchanged with service exchange items.
- These items will be charged at an exchange price when the faulty items are returned and must be in a repairable condition.
- Products found to be damaged beyond economical repair will need to be replaced with new items once the client has approved the quote.
- A ‘strip-down’ charge of R75.00 excluding VAT* will be levied if the quotation is not accepted.
- Any circuit board or operator that was only tested, and not repaired, will NOT result in the guarantee period being extended, where applicable.
- Warranties on any repair will not apply to any product which:
- a) has been subject to misuse, or which has been used for any purpose other than it was designed for by Centurion Systems;
- b) has not been installed per the installation instructions provided;
- c) has been damaged as a result of handling during transit, atmospheric conditions, insect infestation, power surges, an act of god or other forces outside of Centurion Systems’ control;
- d) has been repaired by any person or workshop NOT authorized by Centurion Systems;
- e) has been repaired with components that have not been tested, passed or authorized by Centurion Systems.
- It is the responsibility of the customer to ensure that ALL items handed over to Centurion Systems for repair, are correctly specified on the Service Notification or Goods Receipt Voucher, whichever is applicable.
- Items not collected within three months will be sold to defray costs.
- This applies to all items that have been repaired and are ready for collection, items awaiting quote approval and items where the quote has been rejected.
- To confirm ownership, clients must present the original Service Notification or Goods Receipt Voucher when collecting their repairs.
- A strip-down charge is referred to for RSA markets only.
Happy Customers
Top Quality Brands
